arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
ER 25 P CAT 40x2 Illustration similar

ER 25 P CAT 40x2"

ER Precision collet chuck

ID 1342361

ER 25 P CAT 40x2", Toolholders
  • ER Precision collet chuck
  • Series: ER Precision collet chuck
  • Toolholder interface: CAT 40
  • Projecting length: 50.8 mm
  • Run-out accuracy: ≤ 0.003 mm at 2.5 x DThe run-out accuracy of ≤ 0.003 mm at 2.5 x D when using the ER precision collet and a defined torque
  • Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Scope of delivery: Includes clamping nut
기술 ER 정밀 콜릿 척
시리즈 ER 정밀 콜릿 척
툴홀더 인터페이스 CAT 40
툴홀더 표준 ASME B5.50
ER 클램핑 크기 ER 25
최소 클램핑 지름 D1 [mm] 1.0
최소 클램핑 지름 D1 [mm] 16.0
D2 [mm] 44.0
D3 [mm] 44.0
투영 길이 L1 [mm]/[인치] 50,8 mm / 2.0"
투영 길이 L1 [mm] 50.8
L4 [mm] 24.0
L5 [mm] 31.7
중량 [kg] 1.03
냉각수 방수 예
표준 길이 예

흔들림 정확도
2.5 x D에서 0.003mm 이하
ER 정밀 콜릿과 정의된 토크를 사용할 때 2.5 x D에서 0.003mm 이하의 런아웃 정확도를 보장합니다.

밸런싱 등급
G2.5 @ 25,000 RPM 또는 Umax < 1 gmm

데이터 캐리어
데이터 캐리어용 보어를 옵션으로 이용 가능

툴홀더 변경
자동화 툴홀더 변경을 위해

냉각수 공급
ASME B5.50에 따른 냉각수 공급
AF형 보어는 수송을 위해 밀폐됩니다.

길이 조정 나사
축방향 길이 조절을 위한 조정 나사 없음

제공 범위
클램핑 너트 포함

개별
요청 시 추가 크기 및 맞춤형 디자인 사용 가능