arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
WEL CF HSK-A 63 Ø10x120 Illustration similar

WEL CF HSK-A 63 Ø10x120

WELDON end mill holders

ID 23003074

WEL CF HSK-A 63 Ø10x120, Toolholders
  • WELDON end mill holders
  • Series: WELDON
  • Cool Flow variant
  • Toolholder interface: HSK-A 63
  • Clamping diameter: 10 mm
  • Projecting length: 120 mm
  • Run-out accuracy: ≤ 0.003 mm measured from taper to D1
  • Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Scope of delivery: Including WELDON clamping screw and two M3 screws for closing the Cool Flow option (if required)
Technology WELDON end mill holders
Series WELDON
Toolholder interface HSK-A 63
Toolholder standard DIN ISO 12164-1
Clamping diameter D1 10 mm
D2 [mm] 35.0
D6 [mm] 41.0
Projecting length L1 [mm]/[inch] 120 mm / 4.7"
L2 [mm] 41.0
L4 [mm] 94.0
G1 M10
Weight [kg] 1.305
Cool Flow variant yes

型号
用于夹持圆柱柄的刀具,符合 DIN 1835B/6359HB 标准

回转精度
从锥体到 D1 测量 ≤ 0.003 mm

平衡等级
转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm

螺纹 G1
G1 = 夹紧螺钉的螺纹

RAM 数据采集器
符合 DIN 69873 规定的钻孔用于安装数据芯片

刀柄更换
对于自动更换刀柄

冷却剂供应
冷流版本
冷却液通过两条冷却液通道直接送入刀具切削刃

标配范围
含侧固式夹持螺钉和两个 M3 螺钉,用于封闭 Cool Flow 冷流选配项(按需求)

单独
可按照客户要求,提供其他尺寸和订制设计