FTS 070-1200-28
ID 1598247
- 測定レンジ Fx、Fy : ± 500 N
- 測定レンジ Fz: ± 1200 N
- 測定レンジ Mx、My: ± 28 Nm
- 測定レンジ Mz: ± 28 Nm
- IP 保護等級: 67
技術的詳細
| 重量 [kg] | 0.36 |
|---|---|
| IP 保護等級 | 67 |
| 測定レンジ Fx、Fy [N] | ± 500 |
| 測定レンジ Fz [N] | ± 1200 |
| 測定レンジ Mx、My [Nm] | ± 28 |
| 測定レンジ Mz [Nm] | ± 28 |
| 解像度 Fx、Fy [N] | 0.025 |
| 解像度 Fz [N] | 0.048 |
| 解像度 Mx、My [Nm] | 0.00112 |
| 解像度 Mz [Nm] | 8.4E-4 |
| 測定範囲に対する相対的な表示偏差 | <1,0 %-fs |
| 最大表示偏差 Fx、Fy [N] | 5.0 |
| 最大表示偏差 Fz [N] | 12.0 |
| 最大表示偏差 Mx、My、Mz [Nm] | 0.28 |
| 最大サンプリングレート [Hz] | 2000.0 |
| 最大出力レート [Hz] | 1000.0 |
| アクセサリ情報 | FTSセンサーの他に、接続ケーブルとインターフェースボックスも必要です。 |
Dimensionen und max. Belastungen
Dimensionen und max. Belastungen
Alle Kräfte und Momente, die auf den Sensor wirken, müssen innerhalb des spezifizierten Messbereichs liegen.
Das Überschreiten des Messbereichs reduziert die maximale Anzahl an Lastzyklen und kann zur Beschädigung des Sensors führen. Bitte sprechen Sie uns an, falls Ihre Anwendung den Messbereich überschreitet.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Measuring accuracy
< 1% of the upper limit value of the measuring range at 22 °C
Splash water protection
IP67 as standard
Housing
Aluminum and stainless steel
Warranty
24 months