MTTH HSK-A 100 MK2x120
Morse taper mountings with locking thread
ID 23001930
MTTH HSK-A 100 MK2x120, Toolholders
- Morse taper mountings with locking thread
- Series: Morse taper mountings with locking thread
- Toolholder interface: HSK-A 100
- Thread in clamping diameter: M10
- Morse taper: MK 2
- Projecting length: 120 mm
- Run-out accuracy: ≤ 0.008 mm measured from taper to internal taper
- Balancing grade: G6.3 at 8,000 RPM or Umax < 1 gmm
Technical details
| Technology | Morse taper mountings with locking thread |
|---|---|
| Series | Morse taper mountings with locking thread |
| Toolholder interface | HSK-A 100 |
| Toolholder standard | DIN ISO 12164-1 |
| MK size | MK 2 |
| Thread tightening bolt G | M10 |
| D2 [mm] | 32.0 |
| Projecting length L1 [mm]/[inch] | 120 mm / 4.7" |
| L4 [mm] | 91.0 |
| Weight [kg] | 2.59 |
| Coolant-proof | yes |
| Standard length | yes |
Versione
Per il montaggio di utensili cono morse con filettatura di bloccaggio, conformemente alla norma ISO 228A.
Concentricità
≤ 0,008 mm misurato dal cono al cono interno
Grado di bilanciatura
G6,3 a 8.000 giri/min o Umax < 1 gmm
Sedi chip
Fori sede chip conformi alla norma ISO 69873
Cambio del portautensile
Per il cambio automatico del portautensile
Ogni esigenza
Ulteriori misure e versioni personalizzate disponibili su richiesta