arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitter userwarning wechat xing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
ROTA-S plus 400 Z380-SFG

ROTA-S plus 400 Z380-SFG

Stationary 3-jaw Chucks, manually actuated

ID 410015

Ready for shipment from 11 working days
Stationary manual lathe chuck standard

Product features:
  • 3-jaw wedge-bar chuck
  • Jaw quick-change system
  • Through-hole: 102 mm
  • Spindle holder: Z380
  • Jaw interface: Angled serration
Technical data:
  • Stroke per jaw: 12 mm
  • Tooth pitch: 8.5 mm
  • Max. clamping force: 230 kN
  • Max. torque: 280 Nm
  • Weight: 99 kg
Serration Angled serration
Max. clamping force [kN] 230
Max. torque [Nm] 280
Stroke per jaw [mm] 12
Tooth pitch [mm] 8.5
Weight [kg] 99

General notes about the series

Definition clamping force
The clamping force is the arithmetic sum of the individual forces occuring at the chuck jaws, distance “H“ at maximum pressure and maximum torque. The specifications exclusively refer to the grease used by SCHUNK.

Scope of delivery
Manual lathe chuck, base jaws with tongue and groove, mounting screws, spanner wrench, SCHUNK magnets, quick guide, operating manual; without top jaws