MFT-390-F-R-0
Husillo de pulido
ID 322251
Este producto ha sido descatalogado y ya no está disponible.
Obtenga más información y póngase en contacto aquí.
Husillo de pulido MFT, Tamaño: 390, neumática
- Sensor delantero: sí
- Sensor de retracción: sí
- Sensor de velocidad: no
- Trayecto de compensación Z: 15 mm
Información técnica
| Forward sensor | yes |
|---|---|
| Retract sensor | yes |
| Tachometer sensor | no |
| Recommended compensation path [mm] | ± 7.5 |
| Max. compensation path [mm] | 15.0 |
| Weight [kg] | 3.3 |
| Compliance force at 0.35 bar [N] | 14.0 |
| Compliance force at 4.1 bar [N] | 74.0 |
| Idle speed [1/min] | 5600.0 |
| Noise emission [dB(A)] | < 75 |
| Speed under load [1/min] | 2600.0 |
| Power at 2600 RPM [W] | 390.0 |
| Nominal torque [Nm] | 1.4 |
| Standstill torque [Nm] | 2.7 |
| Operating pressure [bar] | 6.2 |
| Idle air consumption [l/s] | 9.0 |
| Clamping diameter | 3/8" |
| Diameter D [mm] | 94.9 |
| Height Z [mm] | 202.7 |
Dimensions and maximum loads
Dimensions and maximum loads
The indicated forces show the maximum payload.
General notes about the series
Ambient conditions
Please note that the unit is notsuitable for use in an area where coolants or cutting fluids are present.
Mounting
on the robot arm or as a stationary unit
Actuation
pneumatically, via dried, filtered and preferably oiled compressed air
Warranty
24 months