KSX-E IOL

5 轴虎钳

电动 5 轴虎钳，夹持行程可进行连续编程，用于数字化流程监控。

Digital process monitoring
The digitalization of clamping devices will also have an increasing impact on clamping devices over the coming years, as these offer clear advantages, especially when machining medium and relatively small lot sizes with automated parts handling and comprehensive process monitoring. The new electromechanically driven 5-axis vise KONTEC KSX-E IOL has now been developed precisely for this purpose. Activated by 24 V DC, the new vise can be used to program and continuously adjust the clamping force up to 40 kN per jaw. The large clamping range of up to 420 mm with jaw pre-positioning makes the KONTEC KSX-E IOL a very flexible clamping device, especially in this field of application. All programmable parameters can also be transferred to the machine control and evaluated via the integrated IO-Link interface.
Optimum 5-sided accessibility
Due to its geometry with very high jaws, the vise ensures optimal accessibility for 5-sided complete machining on 5-axis machines. The top-mounted spindle ensures that the clamping force is applied directly below the workpiece, thus preventing the jaws from lifting up. The vise works reliably even under the influence of chips, dirt or coolant. Thanks to its complete sealing and metal housing, the electronics and actuators are also optimally protected. The extensive portfolio of system and top jaws from SCHUNK rounds off the overall package of the KONTEC KSX-E IOL