MMS 22-PI1-S-M8-PNP-SA
Programmable magnetic switches
ID 301166
Programmable magnetic switch MMS 22-PI1, Version with lateral cable outlet, Teach function, C-slot
- Number of switching points: 1
- Switching type: PNP
- Closer
- Cable length: 30 cm
- Electrical connection: M8 connector, 3-pin
- Nominal voltage: 24 V
Technical details
| Measuring principle | magnetic |
|---|---|
| Switching function | Closer |
| Type of switching | PNP |
| Number of switching points | 1 |
| Teach function | yes |
| typical switching time [s] | 0.001 |
| Max. switching frequency [Hz] | 1000.0 |
| Min. ambient temperature [°C] | -20.0 |
| Max. ambient temperature [°C] | 80.0 |
| LED display in sensor | yes |
| Type of voltage | DC |
| Nominal voltage | 24.0 |
| Min. operating voltage | 10.0 |
| Max. operating voltage | 30.0 |
| Voltage drop [V] | 1.5 |
| Max. switching current | 0.05 |
| Short circuit protection | yes |
| Protected against polarity reversal | yes |
| Housing material | PA |
| Cable connector/cable end | M8 connector, 3-pin |
| Cable length L [cm] | 30.0 |
| Cable diameter D [mm] | 2.2 |
| Cable design (wire cross section/number of wires) | 3x 0,05mm2 |
| Cable sheath material | PUR |
| Min. bending radius (dynamic) [mm] | 22.0 |
| Min. bending radius (static) [mm] | 11.0 |
| Weight [kg] | 0.01 |
| Protection class IP (sensor, plugged) | 67 |
| Protection class | III |
| Version with lateral cable outlet | yes |
*Tested cutting emulsions: r.rhenus TU 43P, Motorex Swisscool Magnum UX 550 and Oemeta 760 (1008339).
시리즈에 관한 일반 참고 사항
SCHUNK의 그리핑 및 회전 모듈, 리니어 모듈 및 로봇 액세서리 구성 요소는 서로 최대한 효율적으로 호환되도록 설계되었으므로, 항상 SCHUNK의 적합한 센서를 사용하여 모니터링해야 합니다.
센서와 제품의 조정은 파라미터 유형과 자석 강도, 간극, 벽 두께, 자석과 센서 사이 벽 재료, 그리고 정렬과 센서 민감성의 상호 작용을 특징으로 합니다.
SCHUNK 제품에 통합되는 다른 제조업체의 센서는 탁월한 전환 결과를 제공는 경우가 거의 없습니다. 게다가 SCHUNK는 그러한 제품의 올바른 기능이나 기능적인 안전을 보장할 수 없습니다.
센서의 정밀도가 상대적으로 높기 때문에 학습 온도와 작업 온도의 차이가 30K를 초과하면 안 됩니다.
하우징 재료
PA
케이블 코팅 재료
PUR
설치
센서 홈에 클램핑되고 소켓 헤드 나사로 고정
보증
24개월