arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.

WDP-5X

Pneumatically actuated modular system

The pneumatically actuated modular system WDP-5X enables user-friendly set-up of large components. The modules are clamped via spring force and can be opened simultaneously with compressed air. Depending on customer's request, the pneumatic modules can be replaced by manual modules in order to enable manual actuation.
The basic modules serve as a basis for every clamping solution. They establish a rigid connection to all conventional machine tables. Using the stacking modules, the individual clamping heights can then be achieved. The form-fit connection to the workpiece is finally implemented using clamping modules in combination with clamping pins, compensation pins or clamping pin increases.

Our performance promise. Your benefits.

  • Clamping of freely molded parts
  • Clamping without interfering contour
  • Pull-down forces of up to 25 kN
  • Integrated air feed-through to the clamping module
  • Form-fit, self-locking connections
  • Modules used as machine table interface

    Modules used as machine table interface

    Basic modules as interfaces for all conventional machine tables of milling centers.
    Show series
    Modules used for height adjustment

    Modules used for height adjustment

    Stacking modules with integrated media feed-through to achieve a wide range of clamping heights.
    Show series
    Modules used as workpiece interface

    Modules used as workpiece interface

    Clamping modules or compensation modules used as an interface to the workpiece. The clamping modules can be actuated pneumatically or manually. The compensation modules serve to compensate for fine height differences.
    Show series
    Clamping pins

    Clamping pins

    Clamping pins with short taper for form-fit connection of workpieces or devices with the clamping modules.
    Show series