TENDO Zero CAT40 Ø5/8"x4"
液压膨胀刀柄
ID 0203654Z
This product has been discontinued and is no longer available.
TENDO Zero CAT40 Ø5/8"x4", 刀柄
- 液压膨胀刀柄
- 系列: TENDO Zero
- 刀具夹持接口: CAT 40
- 夹持直径: 5/8"
- 突出长度: 101.6 mm
- 回转精度: 2.5 x D 处 < 0.003 mm0 微米的可调节回转精度
- 平衡等级: 转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
- 最小扭矩: 185 Nm
Technical details
| Series | TENDO Zero |
|---|---|
| D2 [mm] | 38.0 |
| Min. torque [Nm] | 185.0 |
| D3 [mm] | 44.45 |
| D6 [mm] | 33.5 |
| G | M10x1 |
| Technology | Hydraulic expansion toolholder |
| Toolholder interface | CAT 40 |
| Toolholder standard | ASME B5.50 |
| Clamping diameter D1 | 5/8" |
| Weight [kg] | 2.0 |
| L5 [mm] | 82.55 |
| L4 [mm] | 50.0 |
| L2 [mm] | 49.0 |
| L3 [mm] | 10.0 |
| Projecting length L1 [mm]/[inch] | 101,6 mm / 4.0" |
Version
Short, slim design
Run-out accuracy
< 0.003 mm at 2.5 x D
Run-out accuracy of 0 microns, adjustable
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ASME B5.50
Bores for form AF are sealed with set-screws as transport safety
Length-setting screw
With adjustment screw for axial length adjustment
Scope of delivery
Including hexalobular socket wrench for TENDO Zero, without actuation key
Individual
Additional sizes and customized designs are available upon request