arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
KSC-F

KSC-F

Basic clamping vise
The SCHUNK KONTEC KSC-F single-acting vises are perfectly suitable for equipping palletizing systems. Due to the modular system, the VERO-S interface and the 160° quick clamping, they can be adapted to new clamping tasks in no time at all.

Advantages – Your benefits

  • Extremely flat design
    For maximum utilization of the machine room
  • Quick clamping via torque wrench
    Simple, fast, and reliable workpiece clamping
  • High clamping forces
    Ensure process reliability during machining
  • Large clamping range
    High level of flexibility
  • Lateral drainage slots
    For drainage of coolant and chips
  • Wide range of applications
    Suitable for rough and finished parts machining
  • Vast chuck jaw program
    Optimal adaptation to new clamping tasks
  • Optimum jaw support for O.D. and I.D. clamping due to a very long base jaw guidance
    Allows high clamping forces at a long service life
  • Clamping by tension
    No bending of base body
  • VERO-S interface
    Can be flexibly combinationed with the large VERO-S modular system. Even shorter set-up times

Options and special information

  • The highly efficient all-rounder for raw and finished part machining
    SCHUNK KONTEC KSC-F single-acting vise with fixed jaw is especially suitable for use in automated machine loading. They score with a quick adjustment of the clamping range, flat design, and low weight. These are the perfect conditions for the use in pallet storage units. The sizes KSC-F 80, KSC-F 125, and KSC-F 160 are particularly designed for the common pallet sizes 320x320 mm, 400x400 mm, and 500x500 mm.
  • It achieves high clamping forces even at a comparably low torque. As the clamping is provided by tension, the bending load on the base body is minimized. The vises are therefore perfectly suitable for the use on the quick-change pallet system from SCHUNK.