MTTA HSK-A 100 MK4x170
Morse taper mountings with tangs
ID 23001922
MTTA HSK-A 100 MK4x170, Toolholders
- Morse taper mountings with tangs
- Series: Morse taper mountings with tangs
- Toolholder interface: HSK-A 100
- Morse taper: MK 4
- Projecting length: 170 mm
- Run-out accuracy: ≤ 0.008 mm measured from taper to internal taper
- Balancing grade: G6.3 at 8,000 RPM or Umax < 1 gmm
Technical details
| Technology | Morse taper mountings with tangs |
|---|---|
| Series | Morse taper mountings with tangs |
| Toolholder interface | HSK-A 100 |
| Toolholder standard | DIN ISO 12164-1 |
| MK size | MK 4 |
| D2 [mm] | 48.0 |
| Projecting length L1 [mm]/[inch] | 170 mm / 6.7" |
| L4 [mm] | 141.0 |
| Weight [kg] | 3.45 |
| Coolant-proof | yes |
| Standard length | yes |
Variant
Voor het bevestigen van conisch morsegereedschap met doorns conform DIN 228B.
Uitloopnauwkeurigheid
≤ 0,008 mm gemeten van kegel tot inwendige kegel
Balanceergraad
G6.3 bij 8.000 tpm of Umax < 1 gmm
Gegevensdragers
Boorgaten voor gegevensdragers volgens DIN 69873
Wissel van gereedschapshouders
Voor automatische wissel van gereedschapshouders
Individueel
Andere afmetingen en uitvoeringen op maat zijn op verzoek verkrijgbaar