Technical data MWA-030-2P-4E
|Miniature change adapter|
|Recommended handling weight [kg]||1|
|Repeat accuracy [mm]||0.1|
|Min./max. distance when locking [mm]||0.25|
|No. of fluid feed-throughs||2|
|Number of electrical feed-throughs||4|
|Max. current [A]||1|
|Max. permissible XY axis offset [mm]||± 0.3|
|Max. permissible angular offset [°]||± 0.8|
|Diameter D [mm]||30|
|Height Z [mm]||5|
|Moment Mx max. [Nm]||1|
|Moment My max. [Nm]||1|
|Moment Mz max. [Nm]||0.75|
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
by turning the locking lever, the head and adapter are locked and unlocked.
Integrated pneumatic and electric feed-throughs
Scope of delivery
Electrical feed-throughs, O-rings for pneumatic feed-throughs, and small components for mounting