Digital services EOA-TM51214-SHA-050-E08-000
Technical data EOA-TM51214-SHA-050-E08-000
|Manual change adapter|
|Recommended handling weight [kg]||11|
|Repeat accuracy [mm]||0.02|
|Max. distance when locking [mm]||1|
|Number of pneumatic feed-throughs||6|
|Feed-throughs for radial use||6|
|Pitch circle diameter [mm]||50|
|Connection flange according to||ISO 9409-1-50-4-M6|
|Min. ambient temperature [°C]||5|
|Max. ambient temperature [°C]||60|
|Diameter D [mm]||63|
|Height Z [mm]||16|
|Screw connection diagram||S5/S7 via adapter plate|
|Moment Mx max. [Nm]||75|
|Moment My max. [Nm]||75|
|Moment Mz max. [Nm]||135|
|Max. force Fz [N]||900|
|Number of pin contacts||8|
|Nominal current [A]||1.5|
|Direct current [V DC]||30|
|Electrical connection||M8 connector, 8-pin|
|Electrical connection outlet||tangential (left)|
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Manual via locking lever
by turning the locking lever, the head and adapter are locked and unlocked.
Optional via electrical modules and/or fluid modules. Pneumatic feed-through already integrated.
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.