arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
Clamping pallets empty for NSE mini

Clamping pallets empty for NSE mini

Clamping pallets without clamping devices
Empty clamping pallets for placing on the VERO-S clamping stations for customized design with clamping devices.

Advantages – Your benefits

  • SCHUNK modular system
    Innumerable combinations of standard clamping devices suitable for different types of machines
  • Low height
    Increases the workspace of your machine
  • All pneumatic modules can be operated at a system pressure of 6 bar
    Additional pressure intensifiers are not required
  • Positioning via short taper
    Very easy joining process at a repeat accuracy of < 0.005 mm
  • Patented dual stroke system for highest pull-down forces
    Therefore extremely rigid clamping without vibrations
  • Form-fit, self-retained locking
    Full pull-down force is maintained even in the event of a pressure drop
  • Corrosion-free stainless steel design
    Long life time and maximum process reliability
  • Turbo integrated by default
    Pull-down force increased by up to 300% for optimum use of the machine´s performance, hence high efficiency

Options and special information

  • Empty clamping pallets from SCHUNK are used for customized rework and for applying customized clamping solutions. These are available as blank clamping pallets. With these clamping pallets customized clamping solutions and devices can be exchanged on and off in a very short time.