KSH3-LH 160-Z-IM
Ident.-Nr. 1467606
Produktmerkmale:
- 2-Backen-Kraftspannblock
- Zentrisch spannend
- Langhub
- Koordinatengefertigte Absteckbohrungen
- Induktive Backenabfrage
- Grundbacken: Spitzverzahnung und Kreuzversatz
- Abmessungen: 160 x 160 x 87,2 mm
- Spannkraft bei max. Betriebsdruck: 40 kN
- Hub pro Backe: 8 mm
- Max. Backenhöhe: 60 mm
- Wiederholgenauigkeit: 0.01 mm
- Betriebsdruck: 10 - 120 bar
- Übersetzungsvolumen pro Doppelhub: 100 cm³
- Schließ-/Öffnungszeit: 1.5 s
- Gewicht: 14 kg
Technische Details
| Hub pro Backe [mm] | 8.0 |
|---|---|
| Spannkraft bei max. Betriebsdruck [kN] | 40.0 |
| Min. Betriebsdruck [bar] | 10.0 |
| Max. Betriebsdruck [bar] | 120.0 |
| Wiederholgenauigkeit Spanner [mm] | 0.01 |
| Max. Backenhöhe [mm] | 60.0 |
| Abstand H [mm] | 25.0 |
| Übersetzungsvolumen pro Doppelhub [cm³] | 100.0 |
| Schließ-/Öffnungszeit [s] | 1.5 |
| Gewicht [kg] | 14.0 |
Scope of delivery
Clamping force block, fastening screws, cover plugs, clamping sleeves, fitting screws, inductive proximity switch, connection cable, cover, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Inductive monitoring of clamping slide positions
Possibility to monitor two jaw positions between the end positions of the base jaws using proximity switches (e.g. "open" and "clamped").
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)