TCU-Z-050-3-OV
ID 324749
- Force Fd max.: 500 N
Détails techniques
ロック | ロックなし |
---|---|
エラストマーの硬度 [Shore] | 68.0 |
偏差 X [°] | ± 1 |
偏差 Y [°] | ± 1 |
偏差 Z [°] | ± 1.5 |
重量 [kg] | 0.09 |
最低周囲温度 [°C] | -10.0 |
最高周囲温度 [°C] | 90.0 |
最大力 Fd [N] | 500.0 |
直接接続 * | PZN-plus 50 |
D 径 [mm] | 50.0 |
高さ Z [mm] | 18.6 |
モーメント Mx 最大 [Nm] | 15.0 |
トルク My 最大 [Nm] | 15.0 |
モーメント Mz最大 [Nm] | 15.0 |
寸法と最大荷重
偏差
最大偏差
寸法と最大荷重
アンロック状態では力とトルクが最大値で、同時に発生することがあります。ロック状態では重量と加速によってもたらされた加重のみが許容されます。
偏差
重心までの長さ (L) により異なる偏差 (fa)
最大偏差
重心までの長さ (L) により異なる偏差 (fa)
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Monitoring
by magnetic switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Material
Elastomer material
Housing
Aluminum alloy
Scope of delivery
Robot-side mounting screws
Warranty
24 months