SRH-plus 20-W-M8
ID 359241
- Nº de passagens de fluido: 4
- Tamanho das conexões E na extremidade de saída: M8
- Torque: 3 Nm
Détails techniques
| Ângulo de rotação [°] | 180 |
|---|---|
| Ajuste de posição final [°] | 3 |
| Torque [Nm] | 3.0 |
| Classe de proteção IP | 67 |
| Peso [kg] | 2.2 |
| Consumo de fluido (2x nom. ângulo) [cm³] | 60.0 |
| Tempo de giro sem carga útil [s] | 0.5 |
| Pressão nominal de operação [bar] | 6.0 |
| Pressão de operação mínima [bar] | 3.0 |
| Pressão máxima de operação [bar] | 8.0 |
| Diâmetro da mangueira de conexão | 6 x 3.9 x 1.05 |
| Nº de passagens de fluido | 4.0 |
| Pressão máx. passagem de meios fluidos [bar] | 8.0 |
| Min. temperatura ambiente [°C] | 5.0 |
| Máx. temperatura ambiente [°C] | 60.0 |
| Precisão de repetição [°] | 0.05 |
| Nº de conexões E na extremidade de saída | 6.0 |
| Tamanho das conexões E na extremidade de saída | M8 |
| Máx. tensão [V] | 24.0 |
| Corrente máxima por fio [A] | 1.0 |
| Máx. atual [A] | 1.0 |
| Comprimento X [mm] | 76.0 |
| Largura Y [mm] | 132.0 |
| Altura Z [mm] | 133.6 |
| Momento Mx máx. [Nm] | 10.4 |
| Força axial máx. Fz máx. [N] | 800.0 |
Dimensions and maximum loads
Máx. inércia admissível J
Dimensions and maximum loads
The indicated moments and forces are statical values and may appear simultaneously. Throttling has to be done for ensuring that the rotary movement takes place without impact or bouncing. Otherwise the service life reduces.
Máx. inércia admissível J
- Axe X:
- Tempo de rotação
- Axe Y:
- Momento de inércia de massa
- Axe X supérieur:
- Ciclos por hora
Mediante consulta, teremos prazer em ajudá-lo a projetar outras aplicações. Entre em contato conosco.
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Customized angle of rotation
More swivel angles are available on request.
Torque in the end positions
Please note that the final angular degrees (approx. 2°) before the end position can only be approached using the force of a single drive piston. For this reason, double actuated modules only have about half the rated torque available in this area. An external stop can be used to provide the full torque even in the end positions.
Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.
Standard conditions
The technical data shown refers to an environment of 20 °C and atmospheric pressure.
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Double piston rack and pinion principle
Scope of delivery
Centering sleeves, O-rings for direct connection, assembly and operating manual with manufacturer’s declaration
Warranty
24 months
Service life characteristics
on request