arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO CF SK 40 Ø16x65 類似のイラスト

CELSIO CF SK 40 Ø16x65

焼きバメタイプ

ID 23005068

CELSIO CF SK 40 Ø16x65, ツールホルダー
  • 焼きバメタイプ
  • シリーズ: CELSIO
  • Cool Flow モデル
  • ツールバーインターフェース: SK 40
  • クランプ径: 16 mm
  • 突出長さ: 65 mm
  • 振れ精度: ≤ 0.003  mm、クランピングボアで測定 (DIN 69882-8に準拠)
  • バランスグレード: 25,000 RPM または Umax < 1 gmm 時に G2.5
  • 最小トルク: 300 Nm
Technology Heat shrinking toolholder
Series CELSIO
Toolholder interface SK 40
Toolholder standard DIN ISO 7388-1 AD/AF
Clamping diameter D1 16 mm
D6 [mm] 29.0
Projecting length L1 [mm]/[inch] 65 mm / 2.6"
L2 [mm] 51.0
L4 [mm] 45.9
Min. torque [Nm] 300.0
Weight [kg] 1.01
Cool Flow variant yes

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore holes for data carriers according to DIN 69873

Toolholder changes
For automatic toolholder changes

Coolant supply
Cool Flow version
Coolant is fed via two coolant bore holes directly to the cutting edge of the tool
Coolant supply according to ISO 7388 AD/AF
Bores for form AF are sealed with set-screws as transport safety

Length-setting screw
Without adjustment screw for axial length adjustment

Balancing screw
With thread for balancing screws

Individual
Additional sizes and customized designs are available upon request