KSP3-LH 315-Z
Pneumatic 2-jaw clamping force blocks
N.º de identificação 1409327
Pneumatisch klemkrachtblok in standaardversie
Productkenmerken
Productkenmerken
- Klemkrachtblok met 2 klauwen
- Centrisch klemmen
- Lange slag
- Coördinaatgeslepen positioneringsgaten
- Basisklemmen: Fijne vertanding en messing en groef
- Afmetingen: 315 x 315 x 136 mm
- Klemkracht bij max. bedrijfsdruk: 40 kN
- Slag per klem: 18 mm
- Max. klemhoogte: 500 mm
- Rondloopnauwkeurigheid: 0.02 mm
- Werkdruk: 2 - 6 bar
- Luchtverbruik per dubbele slag bij 6 bar: 21500 cm³
- Sluit-/openingstijd: 2 s
- Gewicht: 70 kg
Detalhes técnicos
| Slag per klem [mm] | 18.0 |
|---|---|
| Klemkracht bij max. bedrijfsdruk [kN] | 40.0 |
| Min. werkdruk [bar] | 2.0 |
| Max. werkdruk [bar] | 6.0 |
| Rondloopnauwkeurigheid van spanner [mm] | 0.02 |
| Max. klemhoogte [mm] | 500.0 |
| Afstand H [mm] | 40.0 |
| Luchtverbruik per dubbele slag bij 6 bar [cm³] | 21500.0 |
| Sluit-/openingstijd [s] | 2.0 |
| Gewicht [kg] | 70.0 |
Scope of delivery
Clamping force block, fastening screws, cover plugs, clamping sleeves, fitting screws, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)