描述
优势 - 您将获益
- 通过手动三爪快换动力卡盘进行工件定心
工件无需手动对准 - 无变形磁性工件夹持
最大径向和轴向偏转公差 - 磁性夹持力大
根据工件的几何形状和材料，可达到高加工性能 - 内部和外部定心
通用且使用灵活 - 最佳防污密封，密封定心卡盘
维护成本低，夹持精度高 - 定心卡爪标准接口
SCHUNK 标准卡盘爪可制成定心卡爪 - 采用卡爪支撑，夹持力高
切削性能优化，特别是硬车削性能 - 磨削和硬车削
非常适用于高精密工件加工 - 立式和卧式机床
几乎适合所有机床使用（车削 – 铣削 – 磨削） - 由于卡爪可缩回，因此能够实现三面加工
降低设置费用，缩短加工时间
Options and special information
- Low-deformation clamping of rings and fitting disks
The ROTA NCML is a combination of manual lathe chuck and magnetic clamping chuck. The manual lathe chuck serves to center the workpiece on the chuck and then clamps it via the magnetic clamping chuck without deformation and vibration. Double AlNiCo magnets are integrated in the magnetic chuck, which allow for demagnetization of the workpiece after machining. - The hybrid chuck is controlled via a control unit or directly via the machine control system. The workpiece can also be lifted from the chuck using pole extensions, and then milled from three sides.