Description
优势 - 您将获益
- 轴中集成了电机和测量系统
将轮廓干涉和空间要求将至最低 - 选配绝对位置测量系统
更少的编程工作，节省启动和工作时间 - 高度动态，周期短，因此生产率高
因此，实现较高的生产力 - 几乎无磨损件
实现长使用寿命 - 预载交叉滚子导轨
这表示绝对无间隙 - 标准安装孔
与装配技术其他系统元件有多种组合 - 可选择气动或电动制动器用作杆锁
系统急停时保证过程可靠 - 按照 SIL2/PLd，对安全设备予以可选认证
借助于 HIPERFACE® 和 DRIVE-CliQ 接口，可用于机器安全领域的高标准应用
Options and special information
- Modular transducer system
The linear axis (similar to illustration) is available with four different path measuring systems. The incremental stroke measuring system has a 1Vss interface. The absolute path measuring systems are optionally available with the interfaces: HIPERFACE®, SSI or DRIVE-CLiQ. - Pneumatic holding brake
Optionally, the linear axis can be delivered with a holding brake. This holding brake is pneumatically actuated. Its function is activated in a non-ventilated state. The holding brake is used to maintain the position of the linear axis in a currentless condition. - Load compensation
Optionally, the linear axis can be delivered equipped with a load compensation device mounted parallel to the motor. A MagSpring® is used for this purpose. The magnetic spring compensates for a part of the weight forces during vertical movements of the linear motor. This can lead to greater dynamic response in certain cases of application. - Electric piston rod brakes
On option, the axis can be fitted with an electrical holding brake. This prevents an unintentional sinking of vertically installed axes in the event of a power failure. The holding brake is also suitable for applications in the field of machine safety. Please feel free to contact us. - Certified encoder system
The encoder systems with the HIPERFACE® (optional) and DRIVE-CLiQ interfaces are certified according to SIL2/PLd. This means that even demanding applications with high requirements in the area of machine safety can be implemented. Please contact us for further information. - NEW: Version with food -compliant lubrication (H1G)
as a solution for an easy entry into medical technology, lab automation, pharmaceutical and food industry. The requirements of EN 1672-2:2020 are not fully met.