arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitter userwarning wechat xing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.

Jaw turning fixture

ADR

Description

The compact and light turning ring sets ADR make child's play of precise turning out or grinding out of highly hardened and heat-treated soft chuck jaws. These are easy to handle and versatile in use on 2, 3 and 6 jaw chucks.
Instead of a variety of different rings, the boring sets mean you only need a few turning disks to implement clamping diameters for O.D. clamping in 2 mm steps. The individual size required is defined via three pins. These have to be screwed into the thread of the jaw turning rings and then inserted into the lathe chuck.
Since no fitting bores are necessary, the turning disks can be used by Plug & Work in no time at all. For more finely graduated intermediate diameters, the pins can be milled. They are available as additional spare parts kits.
Read more Read less

6 Products found

ADR Ausdrehring Ø 164

ADR Ausdrehring Ø 164

ID 6100005
Ready for shipment from 11 working days
  • Min. clamping range  162 mm
  • Max. clamping range  204 mm
ADR Ausdrehring Ø 208

ADR Ausdrehring Ø 208

ID 6100006
Ready for shipment from 11 working days
  • Min. clamping range  206 mm
  • Max. clamping range  248 mm
ADR-C

ADR-C

ID 189500
Ready for shipment in 3-6 days
  • Min. clamping range  30 mm
  • Max. clamping range  248 mm
ADR-C2

ADR-C2

ID 189800
Ready for shipment in 3-6 days
  • Min. clamping range  30 mm
  • Max. clamping range  160 mm
ADR-C Spannbolzen

ADR-C Spannbolzen

ID 122175
Ready for shipment in 3-6 days
  • Clamping Pins  7 x 3 pins
ADR-S

ADR-S

ID 189600
Ready for shipment from 11 working days
  • Min. clamping range  250 mm
  • Max. clamping range  520 mm