Fonction
Sectional diagram
Sectional diagram
The electric drive consists of a primary part (motor coil) and a secondary part (permanent magnets). The phase and the amplitude of the applied electrical current are regulated in the controller. Depending on the application, this sets the profile fitted with magnets in motion or moves the slides of the axis.
- 1
-
Aluminum extruded profile
Flat and weight-optimized - 2
-
Pre-loaded profiled rail guide with recirculating ball-bearing guides
for optimal guidance properties and speeds - 3
-
Integrated secondary parts
with high power magnets - 4
-
Compact primary part slide
with mounting surfaces, guidance adjusted without play and integrated measuring system - 5
-
End plates
with integrated shock absorber elements - 6
-
Motor plug
Position right/left can be selected - 7
-
Measuring system plug
Position right/left can be selected
Sizing assistant and configuration for customized linear axes
Design of the linear direct axis
Modulares Gebersystem
Pneumatische Haltebremse
Chaîne d'entraînement
Bande de recouvrement
UL certification
Schwerlast-Ausführung / Highspeed-Variante
Sizing assistant and configuration for customized linear axes
The SCHUNK sizing assistants make it easy to reliably select the right specific products from the portfolio for each application. With our configurable standard products, we reduce complexity in system planning and offer a large number of individual adaptation options. In just a few clicks, linear axes can be adapted to individual requirements in less than 10 minutes, opening up an even wider range of applications. In addition to configurable standard products, SCHUNK Engineering offers customized solutions – feel free to contact us!
Design of the linear direct axis
The linear direct axis SLD consists of a motor slide with an integrated primary component and a measuring system. The secondary component consists of permanent magnets and is integrated into the aluminum extruded profile of the linear axis.
- 1
-
Aluminum extruded profile
- 2
-
Dauermagnete
- 3
-
Motorschlitten
Modulares Gebersystem
Die Linearachse ist mit unterschiedlichen Wegmesssystemen lieferbar. Das inkrementelle Wegmesssystem verfügt über die Schnittstelle 1Vss. Die absoluten Wegmesssysteme sind wahlweise mit den Schnittstellen HIPERFACE®, HIPERFACE DSL®, DRIVE-CLiQ oder EnDat 2.2 lieferbar. Weitere Schnittstellen sind auf Anfrage möglich.
- 1
-
Lesekopf des Messsystems, fest montiert am Motorschlitten
- 2
-
Maßband des Messsystems, fest montiert auf dem Aluminium-Strangpressprofil
Pneumatische Haltebremse
Optional ist die Linearachse mit einer Sicherheits-Haltebremse lieferbar. Diese Haltebremse wird pneumatisch betätigt. Ihre Funktion ist im unbelüfteten Zustand aktiviert. Die Haltebremse dient damit einer Positionserhaltung der Linearachse im unbestromten Zustand. Die Haltebremse ist auch für Anwendungen im Bereich der Maschinensicherheit geeignet. Bitte sprechen Sie uns an.
- 1
-
Haltebremse, pneumatisch betätigt
Chaîne d'entraînement
Les chaînes porte-câble correspondantes sont disponibles en tant qu'accessoires pour les axes linéaires. (identique à l'illustration). Celles-ci sont adaptées aux courses effectives respectives, fournies avec matériau de montage et, si nécessaire, pré-assemblées.
- 1
-
Chaîne d'entraînement
Bande de recouvrement
En option, l'axe linéaire peut être livré équipé d'un ruban de protection. Cela empêche la saleté de pénétrer à l'intérieur de l'axe et, en même temps, la graisse de s'échapper lorsque l'axe est monté horizontalement ou verticalement.
- 1
-
Covering tape
UL certification
The motor of the linear direct axis is UL-certified as standard. The UL safety mark allows for rapid market access to North America and other countries. UL certifications are awarded on a product-by-product basis and are periodically reviewed by UL. Not only the final product is tested, but also the manufacturing of the product.
Schwerlast-Ausführung / Highspeed-Variante
Für Anwendungen mit erhöhten Anforderungen an die Tragzahlen, Steifigkeit und Schmierintervalle ist die SLD-Achse in einer Schwerlast-Ausführung erhältlich. Ab Baugröße SLD 22 ist die Profilschiene dabei durch eine größere Ausführung mit höheren Tragzahlen ersetzt und das Strangpressprofil als auch die Schlitten entsprechend adaptiert.
Aufbauend auf der Schwerlast-Ausführung ist eine Highspeed-Variante mit Geschwindigkeiten bis zu 10 m/s verfügbar.
Anwendungsbeispiel
Anwendungsbeispiel
Hochflexible Handhabungseinheit zum schnellen und präzisen Setzen von Hairpins in einen Stator zur automatisierten Herstellung von Elektromotoren.
- 1
-
Lineardirektachse SLD
- 2
-
Universallinearachse LDN
- 3
-
2-Finger-Parallelgreifer PGN-plus-P