Gripper for small components
Electric 2-finger parallel gripper with smooth-running base jaws guided on roller bearings
Advantages – Your benefits
- Highest performance density
for the use of smaller grippers sizes
- Control via digital I/O
for easy commissioning and rapid integration into existing systems.
- Two to four stage adjustable gripping force
for simple adaption to sensitive workpieces
- Backlash-free, pre-loaded cross roller guide
for precise gripping with nearly constant force for all permissible finger lengths
- Very high maximum cycles per minute
for highest productivity
- Compact dimensions
for minimal interfering contours in the application
- Proven a thousand times MPG-plus basis
for equal gripping forces and strokes with identically high efficiency
- Brushless DC servomotor
for almost wear-free use and a long service life
- Control via IO-Link
Enables pre-positioning of the gripper finger and evaluation of the gripper condition as well as the adjustability of special gripping modes.
- NEW: food-grade lubrication
as a solution for an easy entry into medical technology, lab automation, pharmaceutical and food industry
Options and special information
- Manually adjustable gripping force
With an integrated rotary switch, the gripping force can be adjusted in two stages for the EGP 25 to 100% and 50%, and in four stages for EGP 40, 50 and 64 to 100%, 75%, 50%, and 25%.
- Version with IO-Link
The integration of IO-Link makes it possible to adjust the gripping force, to pre-position the gripper fingers and to evaluate the gripper status.
- New! Gripping modes with IO-Link
In addition to a cycle time-optimized gripping mode (FastGrip), the IO-Link version also offers a gripping mode with pulse reduction of the gripping force (SoftGrip) for gripping fragile workpieces.
- Speed version S
for faster closing and opening times due to the use of a different gear ratio. The option of a gripping force adjustment is no longer available.
- Optional status monitoring via external sensor system
The status of the gripper can be monitored by external senors.
- Optional adapter plates
Space saving, front-end fastening of the gripper is enabled by optional adapter plates.
- KA connection cable
Connection cables with an angled or a straight female connector can be ordered in various lengths to connect the gripper with the power supply and higher-level control system.
- Food-grade lubrication
The requirements of EN 1672-2:2020 are not fully met.