ELG
Function
Sectional diagram
Sectional diagram
A servomotor drives the ball screw via a toothed belt, which linearly moves the base jaws connected to the spindle nuts and profiled rails.
- 1
-
Drive
Servomotors from numerous manufacturers can be adapted - 2
-
Kinematics
high bearing load capacity and accuracy due to proven combination of ball screw and toothed belt - 3
-
Profiled rail guide
highly loadable, nearly backlash-free base jaw guidance for long finger lenghts - 4
-
Base jaw
for the connection of workpiece-specific gripper fingers
Individually configurable stroke
Finger version
Synchronization
Gripper mounting
Position clamping
Lateral mounting options
Ottimizzazione del peso
Piastre di copertura
Soffietto
Drive motors
Individually configurable stroke
The stroke per jaw can be configured to customer specifications between 100 mm and 400 mm per jaw with millimeter precision. (For size 10, the stroke is limited to 300 mm)
- 1
-
Variant with 100 mm stroke per jaw
- 2
-
Variant with 400 mm stroke per jaw
Finger version
The gripper is available in two finger versions. In addition to the basic variant for short finger lengths, a variant with a long finger length can also be configured for corresponding applications.
- 1
-
Short finger length with two guiding carriages per base jaw
- 2
-
Long finger length with four guiding carriages per base jaw
Synchronization
The gripper can be configured as a synchronous and asynchronous variant. In the synchronous variant, the two base jaws are jointly controlled by a servomotor, with the jaw movement being synchronized by a counter-rotating ball screw. With the asynchronous variant, the two base jaws can be controlled independently and separately from each other. In this variant, one base jaw each is connected to one of the two required servomotors via the ball screw and the toothed belt.
- 1
-
Synchronous version
- 2
-
Asynchronous version
Gripper mounting
The gripper offers different options for mounting on robots or gantries.
- 1
-
One-piece adapter plate (gripper side)
- 2
-
Adapter plate, complete (gripper side + blank)
- 3
-
Adapter plate, complete for screw connection according to EN ISO 9409
Position clamping
The electric holding brake prevents the movement of the ball screw, thereby clamping the position of the base jaws. Two brakes are required for the asynchronous variant. One fast switching module (ROBA®-brake-checker) is required for each holding brake (ROBA-stop®). This is included in the scope of delivery of the gripper.
- 1
-
Electric holding brake
Lateral mounting options
Optional mounting options on the gripper for customized additional attachments such as cameras, sensor distributors or blow-out nozzles. This option cannot be combined with the "weight-optimized design" option.
- 1
-
Filettatura del collegamento per fissaggio aggiuntivo
- 2
-
Accoppiamento per spine di centraggio
Ottimizzazione del peso
Le scanalature nelle pareti laterali riducono il peso della pinza fino al 15%. Questa opzione non si può combinare con l'opzione "opzioni di montaggio laterale".
- 1
-
Scanalature per la riduzione del peso
Piastre di copertura
Le lamiere di copertura chiudono la pinza sul lato dell'attacco. In questo modo si protegge la pinza da influenze esterne nel punto specifico. I collegamenti del motore non sono quindi coinvolti.
- 1
-
Piastre di copertura
- 2
-
Allacciamento del motore
Soffietto
Il soffietto chiude la pinza sul lato delle ganasce base. È disponibile solo in combinazione con l'opzione lamiera di copertura e migliora la protezione della pinza riguardo all'azione dell'ambiente.
- 1
-
Bellows cover
- 2
-
Cover plates
Drive motors
Different drive motors can be adapted to the gripper to enable flexible control and simple connection to existing control concepts.
- 1
-
Motor-specific attachment kit (always included in the scope of delivery)
- 2
-
Bosch or Siemens motors (optionally pre-assembled)
- 3
-
additional motors: see configurator (not included in the scope of delivery)
- 4
-
motors not included in the configurator on request
Application example
Application example
Application-specific long-stroke gripper for handling washing machines in the end-of-line packaging process
- 1
-
Application-specific long-stroke gripper ELG
- 2
-
Attachment fingers
- 3
-
Feeding of the washing machine
- 4
-
Feeding of the packaging material
- 5
-
Further transport of the packed washing machine
