Illustration similar

LOG 20.0-M14x1.5-M5

Internal hole gripper

ID 398920

Internal hole gripper LOG, Size: 20, pneumatic, Mounting thread: M14 x 1.5, Air connection thread: M5

Max. ambient temperature: 80 °C

Download CAD file

Mounting thread A	M14 x 1.5
Air connection thread B	M5
Min. workpiece diameter [mm]	20.0
Max. workpiece diameter [mm]	20.3
Opening force for Ø Dmin [N]	107.2
Opening force for Ø Dmax [N]	27.3
Weight [kg]	0.008
Recommended workpiece weight [kg]	0.55
Cylinder volume per double stroke [cm³]	2.35
Max. operating pressure [bar]	6.0
Nominal operating pressure [bar]	6.0
Closing time [s]	0.05
Opening time [s]	0.05
Min. ambient temperature [°C]	-40.0
Max. ambient temperature [°C]	80.0
Housing material	PA 12
IP protection class	27
Diameter D [mm]	19.8
Tolerance Y	± 0,2
Height Z [mm]	29.0
Concentricity Ø V [mm]	0.3
Perpendicularity W [°]	± 0.5
Moment Mx max. [Nm]	1.5
Moment My max. [Nm]	1.5
Moment Mz max. [Nm]	0.0
Force Fx max. [N]	150.0
Force Fy max. [N]	150.0
Max. axial force Fz max. [N]	150.0

The gripping force can be set directly by the operating pressure. At a lower pressure than the nominal operating pressure, the full stroke cannot be achieved.
The size graduation varies by 1 mm respectively. Please note that the fastening thread A is independent of the size. (LOG 20-25: M14x1.5; LOG 26-63: M16x1; LOG 64-99: M20x1.5)
Information about other sizes can be found online.