Clamping stations for general milling applications with VERO-S NSE plus modules as a basis for extremely fast set-up processes of clamping devices.
Advantages – Your benefits
- SCHUNK modular system
Innumerable combinations of standard clamping devices suitable for different types of machines
- 100% compatible with NSL plus clamping stations
Existing NSL plus clamping stations can be replaced 1:1 by new NSL3 clamping stations
- All pneumatic clamping stations can be operated with a system pressure of 6 bar
Additional pressure intensifiers are not required
- Positioning via short taper
Very easy joining process at a repeat accuracy of < 0.005 mm
- Patented dual stroke system for highest pull-down forces
Therefore extremely rigid clamping without vibrations
- Form-fit, self-retained locking
Full pull-down force is maintained even in the event of a pressure drop
- The modules are stainless and completely sealed
Long life time and maximum process reliability
Options and special information
- VERO-S NSL3
2-, 4-, 6- or 8-way clamping station for mounting all current clamping pallets as well as clamping devices with the corresponding gauge for bore holes.
- VERO-S NST3
4-way clamping stations especially designed for VERO-S tombstones in the sizes 400 and 500 mm.