KOM JIS-BT 40 Ø22x55
Combination shell and end mill adapters
ID 263631
KOM JIS-BT 40 Ø22x55, Toolholders
- Combination shell and end mill adapters
- Series: Combination shell and end mill adapters
- Toolholder interface: JIS-BT 40
- Clamping diameter: 22 mm
- Thread in clamping diameter: M10
- Projecting length: 55 mm
- Run-out accuracy: ≤ 0.006 mm measured from taper to D1
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Technical details
| Technology | Combination shell and end mill adapters |
|---|---|
| Series | Combination shell and end mill adapters |
| Toolholder interface | JIS-BT 40 |
| Toolholder standard | DIN ISO 7388-2 JD/JF |
| Clamping diameter D1 | 22 mm |
| Thread tightening bolt G | M10 |
| D2 [mm] | 40.0 |
| Projecting length L1 [mm]/[inch] | 55 mm / 2.2" |
| L4 [mm] | 28.0 |
| L11 [mm] | 31.0 |
| L12 [mm] | 19.0 |
| Weight [kg] | 1.34 |
| Coolant-proof | yes |
| Standard length | yes |
Versione
Per montaggio frese con cava longitudinale o laterale
Concentricità
≤ 0,006 mm misurati dal cono a D1
Grado di bilanciatura
G2,5 a 25.000 giri/min o Umax< 1 gmm
Sedi chip
Foro sede chip opzionale
Cambio del portautensile
Per il cambio automatico del portautensile
Adduzione di refrigerante
Adduzione interna di refrigerante conforme alla normativa ISO 7388 JD/JF
I fori per forma JF sono sigillati per il trasporto
La fornitura comprende
Include vite di fissaggio fresa, anello di trasmissione e chiave
Ogni esigenza
Ulteriori misure e versioni personalizzate disponibili su richiesta