MFT-390-F-R-0
Polishing spindle
ID 322251
Polishing spindle MFT, Size: 390, pneumatic
- Forward sensor: yes
- Retract sensor: yes
- Tachometer sensor: no
- Compensation Z: 15 mm
Technical details
Noise emission [dB(A)] | < 75 |
---|---|
Compliance force at 0.35 bar [N] | 14.0 |
Compliance force at 4.1 bar [N] | 74.0 |
Speed under load [1/min] | 2600.0 |
Height Z [mm] | 202.7 |
Power at 2600 RPM [W] | 390.0 |
Weight [kg] | 3.3 |
Forward sensor | yes |
Retract sensor | yes |
Tachometer sensor | no |
Nominal torque [Nm] | 1.4 |
Operating pressure [bar] | 6.2 |
Diameter D [mm] | 94.9 |
Recommended compensation path [mm] | ± 7.5 |
Idle speed [1/min] | 5600.0 |
Idle air consumption [l/s] | 9.0 |
Max. compensation path [mm] | 15.0 |
Standstill torque [Nm] | 2.7 |
Clamping diameter | 3/8" |
Dimensions and maximum loads
Dimensions and maximum loads
The indicated forces show the maximum payload.
General notes about the series
Ambient conditions
Please note that the unit is notsuitable for use in an area where coolants or cutting fluids are present.
Mounting
on the robot arm or as a stationary unit
Actuation
pneumatically, via dried, filtered and preferably oiled compressed air
Warranty
24 months