arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
MFT-390-F-R-0 Illustration similar

MFT-390-F-R-0

Polishing spindle

ID 322251

Polishing spindle MFT, Size: 390, pneumatic

  • Forward sensor: yes
  • Retract sensor: yes
  • Tachometer sensor: no
  • Compensation Z: 15 mm
Forward sensor yes
Retract sensor yes
Tachometer sensor no
Recommended compensation path [mm] ± 7.5
Max. compensation path [mm] 15
Weight [kg] 3.3
Compliance force at 0.35 bar [N] 14
Compliance force at 4.1 bar [N] 74
Idle speed [1/min] 5600
Noise emission [dB(A)] < 75
Speed under load [1/min] 2600
Power at 2600 RPM [W] 390
Nominal torque [Nm] 1.4
Standstill torque [Nm] 2.7
Operating pressure [bar] 6.2
Idle air consumption [l/s] 9
Clamping diameter 3/8"
Diameter D [mm] 94.9
Height Z [mm] 202.7

General notes about the series

Ambient conditions
Please note that the unit is notsuitable for use in an area where coolants or cutting fluids are present.

Mounting
on the robot arm or as a stationary unit

Actuation
pneumatically, via dried, filtered and preferably oiled compressed air

Warranty
24 months