KSP3-F 64-AS
Morse automatiche pneumatiche a 2 ganasce
ID 1409336
Morsa pneumatica in versione standard
Caratteristiche del prodotto:
Caratteristiche del prodotto:
- Morsa automatica a 2 ganasce
- Con ganascia fissa
- Corsa standard
- Amplificazione della forza di serraggio/fissaggio esterno
- Ganasce base: Dentatura fine e incastro a croce
- Dimensioni: 64 x 64 x 50,7 mm
- Forza di serraggio alla massima pressione d'esercizio: 3.5 kN
- Forza di serraggio aggiuntiva dal gruppo molle: 0.5 - 1.5 kN
- Corsa per griffa: 4 mm
- Altezza max. ganasce: 60 mm
- Precisione di ripetibilità: 0.01 mm
- Pressione d'azionamento: 3 - 7 bar
- Consumo d'aria per ogni corsa doppia con 6 bar: 220 cm³
- Tempo di chiusura/apertura: 0.1 s
- Peso: 1.5 kg
Specifiche tecniche
| Hub pro Backe [mm] | 4.0 |
|---|---|
| Spannkraft bei max. Betriebsdruck [kN] | 3.5 |
| Min. zusätzliche Spannkraft aus Federpaket [kN] | 0.5 |
| Max. zusätzliche Spannkraft aus Federpaket [kN] | 1.5 |
| Min. Betriebsdruck [bar] | 3.0 |
| Max. Betriebsdruck [bar] | 7.0 |
| Wiederholgenauigkeit Spanner [mm] | 0.01 |
| Max. Backenhöhe [mm] | 60.0 |
| Abstand H [mm] | 10.0 |
| Luftverbrauch pro Doppelhub bei 6 bar [cm³] | 220.0 |
| Schließ-/Öffnungszeit [s] | 0.1 |
| Gewicht [kg] | 1.5 |
Scope of delivery
Clamping force block, fastening screws, cover plugs, clamping sleeves, fitting screws, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)