KSH3 140-Z-PM
油圧式 2ジョークランピングブロック
ID 1463183
油圧式クランピング力ブロック 標準
特長:
特長:
- 2 ジョークランピングブロック
- センタークランプ
- 標準ストローク
- ジグ生成位置決めボア
- 空圧式の終了位置モニタリング
- 空圧式接触モニター
- ベースジョー: 精密セレーション、タングと溝
- 寸法: 140 x 140 x 77,7 mm
- 最大作動圧力での把持力: 30 kN
- 片側ストローク: 3 mm
- 最大ジョー高さ: 60 mm
- 繰り返し精度: 0.01 mm
- 作動圧力: 10 - 60 bar
- ダブルストロークごとの油消費量: 70 cm³
- 閉 / 開時間: 1 s
- 重量: 9.1 kg
技術的詳細
Stroke per jaw [mm] | 3.0 |
---|---|
Closing/opening time [s] | 1.0 |
Weight [kg] | 9.1 |
Min. operating pressure [bar] | 10.0 |
Distance H [mm] | 20.0 |
Repeat accuracy of vise [mm] | 0.01 |
Clamping force at max. operating pressure [kN] | 30.0 |
Max. operating pressure [bar] | 60.0 |
Max. jaw height [mm] | 60.0 |
Oil consumption per double stroke [cm³] | 70.0 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the chuck jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213).