RM 200-W90-1
ID 313007
- トルク: 4 Nm
技術的詳細
| 回転角度 [°] | 90 |
|---|---|
| 停止位置調節範囲 [°] | 5 |
| トルク [Nm] | 4.0 |
| IP 保護等級 | 40 |
| 重量 [kg] | 2.1 |
| 搭載荷重なしの回転タイム (1x 旋回角度) [s] | 0.16 |
| 流体消費量 (2x 定格角度) [cm³] | 74.0 |
| 呼び作動圧力 [bar] | 6.0 |
| 最低作動圧力 [bar] | 3.0 |
| 最大作動圧 [bar] | 8.0 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 60.0 |
| 繰り返し精度 [°] | 0.044 |
| 長さ X [mm] | 80.0 |
| 幅 Y [mm] | 142.0 |
| 高さ Z [mm] | 115.0 |
| トルク My 最大 [Nm] | 18.0 |
| 最大軸方向力 Fz (最大) [N] | 1800.0 |
旋回モジュールの構成については、オンラインで利用可能な Toolbox ソフトウェアの使用を推奨します。選択したユニットのサイズ確認は必須であり、確認を行わない場合過負荷となる場合があります。
リクエストに応じて、他の角度も可能です。
Dimensionen und max. Belastungen
ダンパーの使用範囲
Dimensionen und max. Belastungen
Die angegebenen Momente und Kräfte sind statische Werte und dürfen gleichzeitig auftreten. Die Drosselung muss immer vorgenommen werden, damit die Drehbewegung schlag- und prellfrei erfolgen kann. Ansonsten kann sich die Lebensdauer verringern.
ダンパーの使用範囲
- X 軸:
- 質量慣性モーメント
- Y 軸:
- 回転角度
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Flange position
is always drawn in the left end position. It rotates from here to the right in clockwise direction. The arrow points out the direction of rotation.
Customized angle of rotation
More swivel angles are available on request.
Layout or control calculation
For configuration or control calculation of the units, we recommend to use our Toolbox software, which is available online. Verifying the sizing of the selected unit is absolutely necessary, as otherwise overloading may occur.
Swivel vane material
Steel
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Vane swivel unit
Scope of delivery
Completely ready for operation without bracket for proximity switch and without proximity switch
Warranty
24 months
Service life characteristics
on request