arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Cambie la selección del país para ver la información sobre los productos, servicios y personas de contacto relevantes para su ubicación.
CELSIO BT-DC 40 Ø5x90 類似のイラスト

CELSIO BT-DC 40 Ø5x90

焼きバメタイプ

ID 1428307

Plazo de entrega bajo petición
CELSIO BT-DC 40 Ø5x90, ツールホルダー
  • 焼きバメタイプ
  • シリーズ: CELSIO
  • 二重接触モデル
  • ツールバーインターフェース: BT-DC 40
  • クランプ径: 5 mm
  • 突出長さ: 90 mm
  • 振れ精度: ≤ 0.003  mm、クランピングボアで測定 (DIN 69882-8に準拠)
  • バランスグレード: 25,000 RPM または Umax < 1 gmm 時に G2.5
  • 最小トルク: 8 Nm
Technology Heat shrinking toolholder
Series CELSIO
Toolholder interface BT-DC 40
Clamping diameter D1 5 mm
D2 [mm] 17.0
D6 [mm] 12.0
Projecting length L1 [mm]/[inch] 90 mm / 3.5"
L4 [mm] 63.0
Min. torque [Nm] 8.0
Weight [kg] 1.1
Dual Contact variant yes
Coolant-proof yes
Standard length yes

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore for data carrier as an option

Toolholder changes
For automatic toolholder changes

Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport

Face contact
Similar to DIN ISO 7388-2 JD/JF however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces

Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)

Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)

Individual
Additional sizes and customized designs are available upon request