TCU-P-100-3-OV
ID 324811
Tolerance compensation unit TCU-P, Size: 100, Without locking, Direct connection to*: PGN-plus 100
- Force Fd max.: 2000 N
Información técnica
| Locking | Without locking |
|---|---|
| Hardness of the elastomer [Shore] | 68.0 |
| Deflection X [°] | ± 1 |
| Deflection Y [°] | ± 1.5 |
| Deflection Z [°] | ± 1.2 |
| Weight [kg] | 0.22 |
| Min. ambient temperature [°C] | -10.0 |
| Max. ambient temperature [°C] | 90.0 |
| Max. force Fd [N] | 2000.0 |
| Direct connection to* | PGN-plus 100 |
| Length X [mm] | 50.0 |
| Width Y [mm] | 81.0 |
| Moment Mx max. [Nm] | 60.0 |
| Moment My max. [Nm] | 25.0 |
| Moment Mz max. [Nm] | 60.0 |
*also suitable for other grippers with the same screw connection diagram
Dimensions and maximum loads
Deflection
Load chart
Maximum deflection
Dimensions and maximum loads
The forces and torques are maximum values when unlocked and may occur simultaneously. When locked, only the loads caused by the weight and acceleration are permissible.
Deflection
Deflection (fa) dependent upon the length (L) to the center of mass
Load chart
- Eje X:
- Max. distance
- Eje Y:
- Max. handling weight
Maximum deflection
Deflection (fa) dependent upon the length (L) to the center of mass
시리즈에 관한 일반 참고 사항
험한 환경 조건
(예를 들어 냉각제, 주조 및 연삭 분진이 있는) 험한 환경 조건에서 사용하면 유닛 사용 수명이 크게 단축될 수 있으며 SCHUNK는 이에 대해 보증하지 않습니다. 하지만 해결 방안을 찾아드릴 수 있는 경우가 많습니다. 도움이 필요하신 경우 문의해 주십시오.
핸들링 중량
플랜지에 부착된 총 로드의 중량입니다. 디자인 시, 허용 포스와 모멘트에 주의를 기울여야 합니다. 권장 핸들링 중량을 초과할 경우 수명이 줄어들 수 있다는 것을 참고하십시오.
모니터링
자성 스위치 사용
작동
공압, ISO 8573-1:2010 [7:4:4]에 따른 여과된 압축 에어.
재료
탄성중합체 소재
하우징
알루미늄 합금
제공 범위
로봇 측 설치 나사
보증
24개월