TENDO E compact
유압 확장 툴홀더
TENDO E 컴팩트 유압 확장 툴홀더는 밀링, 드릴링, 리밍 또는 스레드 가공 및 HPC 애플리케이션 시 인상적인 성능을 보여줍니다. 또한 툴의 사용 수명을 최대 300%까지 늘립니다.
테이퍼와 평면 작업 표면을 동시에 갖춘 Dual Contact 버전은 공구 플랜지와 기계 스핀들 전면과 평면 작업 표면의 인터페이스 사이의 인터페이스 관련 간격을 좁혀줍니다.
테이퍼와 평면 작업 표면을 동시에 갖춘 Dual Contact 버전은 공구 플랜지와 기계 스핀들 전면과 평면 작업 표면의 인터페이스 사이의 인터페이스 관련 간격을 좁혀줍니다.
Description
Advantages – Your benefits
- High torque for maximum volume machining
Its compact design ensures high holding forces and thus a high torque transmission - High radial rigidity
No lateral deflection during the metal cutting process and high shape accuracy of the workpiece combined with optimal removal rates - High level of flexibility
Clamping of different diameters due to the use of slotted or coolant-proof intermediate sleeves - Fine-balanced by default
Suitable for high speeds and HPC/HSC machining centers with a balancing grade of G2.5 at 25,000 RPM - Excellent vibration damping
Micro-blowouts are prevented, optimal workpiece surfaces, machine spindle protection, increased tool service life resulting in a reduction of costs - Permanent run-out and repeat accuracy ≤0.003 mm
Even cutting action, increased tool service life, and reduced costs for regrinding or buying new tools - Micron-precise tool change within seconds without peripheral equipment
Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices - Dirt grooves for reliable torque transmission
Dry clamping surfaces, by displacement of oil, grease or lubricant residues into the dirt groove - Comprehensive compatibility
Can be ideally combined with TRIBOS SVL tool extensions - All commercially available tool shank types can be clamped
Form A: with smooth cylindrical shank, shank form A in accordance with DIN 1835 and DIN 6535 HA Form AB: with flat face and cylindrical shank with pulling face, shank form B in accordance with DIN 1835 and DIN 6535 HB Form B: with lateral pulling faces, shank form B in accordance with DIN 1835 Form E: with inclined clamping face, shank form E in accordance with DIN 1835 and DIN 6535 HE
Options and special information
- Flexible clamping areas due to the use of intermediate sleeves
Intermediate sleeves allow clamping of various shank diameters from 3 - 32 mm with just one toolholder. Your advantage: Reduction of the acquisition costs, higher clamping force at the given shank diameter.