SRH-plus 20-W-M8-A
ID 359246
- Anzahl Fluiddurchführungen: 4
- Größe abtriebsseitige E-Anschlüsse: M8
- Drehmoment: 3 Nm
Technical details
| Drehwinkel [°] | 180 |
|---|---|
| Endlageneinstellbarkeit [°] | 3 |
| Drehmoment [Nm] | 3.0 |
| Schutzart IP | 67 |
| Eigenmasse [kg] | 2.2 |
| Fluidverbrauch (2x Nennwinkel) [cm³] | 60.0 |
| Schwenkzeit ohne Aufbaulast [s] | 0.5 |
| Nennbetriebsdruck [bar] | 6.0 |
| Min. Betriebsdruck [bar] | 3.0 |
| Max. Betriebsdruck [bar] | 8.0 |
| Durchmesser Anschlussschlauch | 6 x 3.9 x 1.05 |
| Anzahl Fluiddurchführungen | 4.0 |
| Max. Druck in der Fluiddurchführung [bar] | 8.0 |
| Min. Umgebungstemperatur [°C] | 5.0 |
| Max. Umgebungstemperatur [°C] | 60.0 |
| Wiederholgenauigkeit [°] | 0.05 |
| Anzahl abtriebsseitige E-Anschlüsse | 6.0 |
| Größe abtriebsseitige E-Anschlüsse | M8 |
| Max. Spannung [V] | 24.0 |
| Max. Strom je Ader [A] | 1.0 |
| Max. Strom [A] | 1.0 |
| Länge X [mm] | 76.0 |
| Breite Y [mm] | 132.0 |
| Höhe Z [mm] | 133.6 |
| Moment Mx max. [Nm] | 10.4 |
| Max. Kraft axial Fz max. [N] | 800.0 |
尺寸和最大载荷
Max. zul. Massenträgheit J
尺寸和最大载荷
所示力矩和力为静态值，可能会同时出现。必须进行节流，以确保出现旋转动作时不会发生撞击或弹跳现象。否则将缩短使用寿命。
Max. zul. Massenträgheit J
- X-axis:
- Schwenkzeit
- Y-axis:
- Massenträgheitsmoment
- X-axis top:
- Zyklen pro Stunde
Auslegung weiterer Einsatzfälle auf Anfrage.
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Customized angle of rotation
More swivel angles are available on request.
Torque in the end positions
Please note that the final angular degrees (approx. 2°) before the end position can only be approached using the force of a single drive piston. For this reason, double actuated modules only have about half the rated torque available in this area. An external stop can be used to provide the full torque even in the end positions.
Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.
Standard conditions
The technical data shown refers to an environment of 20 °C and atmospheric pressure.
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Double piston rack and pinion principle
Scope of delivery
Centering sleeves, O-rings for direct connection, assembly and operating manual with manufacturer’s declaration
Warranty
24 months
Service life characteristics
on request