SWA-110-000-000
ID 302411
- Počet průchodů médií: 8
- Max. celkové užitečné zatížení: 150 kg
Technical details
| Doporučená manipulační hmotnost [kg] | 150.0 |
|---|---|
| Max. moment Mx [Nm] | 2352.0 |
| Max. moment My [Nm] | 2352.0 |
| Max. moment Mz [Nm] | 2352.0 |
| Uzamykací síla [N] | 12000.0 |
| Opakovatelná přesnost [mm] | 0.015 |
| Vlastní hmotnost [kg] | 2.2 |
| Max. vzdálenost při zamykání [mm] | 3.0 |
| Závitové vzduchového připojení pneumatického průchodu | 8x G3/8" |
| Max. přípustné odsazení osy XY [mm] | ± 1 |
| Max. přípustný úhlový posun [°] | ± 1 |
| Montáž na straně robotu | ISO 9409-1-125-6-M10 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 60.0 |
| Min. provozní tlak [bar] | 4.5 |
| Max. provozní tlak [bar] | 6.9 |
| Průměr D [mm] | 188.0 |
| Výška Z [mm] | 37.6 |
| Schéma šroubování | 2 x J |
Rozměry a maximální zatížení
Rozměry a maximální zatížení
Toto je max. součet všech sil a momentů, které mohou působit na výměnný systém, aby bylo zajištěno správné fungování.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
locking balls actuated by pistons for locking
Media transmission
variable via attachment feed-through modules, depending on the unit size
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Warranty
24 months
Service life characteristics
on request