KSE3 140 IOL
ID 1465965
产品特性：
- 机电式二爪强力夹具
- 通过 IO-Link 控制
- 中心夹紧
- 标准行程
- 通过 IO-Link 监控卡爪位置
- 基爪: 细齿和榫槽
- 夹持力的可能范围: 9 - 30 kN
- 单指行程: 3 mm
- 卡爪运行速度: 0.4 mm/s
- 工作电压控制装置: 24 V DC
- 工作电压执行器: 24 V DC
- 静态电流: 70 mA
- 平均电流消耗: 800 mA
- 最大输入电流: 5000 mA
- 最大卡爪高度: 60 mm
- 重复精度: 0.01 mm
- 重量: 8.8 kg
技术细节
| Stroke per jaw [mm] | 3.0 |
|---|---|
| Min. clamping force [kN] | 9.0 |
| Max. clamping force [kN] | 30.0 |
| Operating voltage control unit [V DC] | 24.0 |
| Operating voltage actuator [V DC] | 24.0 |
| Quiescent current [mA] | 70.0 |
| Average current consumption [mA] | 800.0 |
| Max. current input [mA] | 5000.0 |
| Travel speed jaws [mm/s] | 0.4 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 60.0 |
| Distance H [mm] | 20.0 |
| Weight [kg] | 8.8 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual; without rigid contact for integration into the machine control
Clamping force
Clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H".
Possible clamping force range
Adjustment range for the clamping force. The target clamping force is set as a percentage in the software.
Average current consumption
Average current consumption over one clamping cycle (clamping/opening).
Max. current input
Maximum current consumption, max. once per clamping cycle.
Travel speed jaws
Maximum possible travel speed with high clamping forces. With lower clamping forces, the travel speed may be slower.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)