DDF 2-063-P4-E6
Ident.-Nr. 323068
- 流体通路数量: 4
- 电气通道的数量: 6
- 工件重量: 35 kg
- 力 Fz max.: 1400 N
- 力 Fd 最大: 6000 N
技术细节
| 通道 | 气动和电气通道 |
|---|---|
| 建议搬运重量 [kg] | 35.0 |
| 最大驱动速度 [1/min] | 110.0 |
| 最大转速 [°/s] | 660.0 |
| 额定转矩 [Nm] | 3.0 |
| 启动扭矩 [Nm] | 4.5 |
| 旋转角度 [°] | > 360 |
| 流体通路数量 | 4.0 |
| 气路通道空气接口螺纹 | 4x M5 |
| 每个接头的最大压力 [bar] | 10.0 |
| 6 bar 时流速（每个通道） [l/min] | 110.0 |
| 最大空气清洁气压 [bar] | 1.0 |
| 电气通道的数量 | 6.0 |
| 最大电压 [V] | 60.0 |
| 最大电流强度 [A] | 1.0 |
| 重量 [kg] | 2.2 |
| 机械人侧连接 | ISO 9409-1-63-4-M6 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 60.0 |
| 最大动态弯曲力矩 Mx* [Nm] | 85.0 |
| 最大动态弯曲力矩 My* [Nm] | 85.0 |
| 最大动态扭矩 Mz* [Nm] | 60.0 |
| 最大剪切力 Fq* [N] | 350.0 |
| 直径 D [mm] | 95.0 |
| 高度 Z [mm] | 97.5 |
| 弯矩 Mx [Nm] | 200.0 |
| 弯矩 My [Nm] | 200.0 |
| 力 Fz max. [N] | 1400.0 |
| 最大力 Fd [N] | 6000.0 |
可按需提供真空连接的型号。详细信息，请咨询我们。
尺寸和最大载荷
尺寸和最大载荷
可能作用于旋转通道的静态力和力矩
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Mounting
Standardized ISO 9409 interface (robot-side)
Housing
high-strength, hard-coated aluminum alloy
Scope of delivery
Rotary feed-through in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months