DDF-SE-080
ID 323280
- 유체 피드 스루 수: 4
- 전기 피드 스루 수: 6
- 포스 Fz 최대: 2000 N
Specifiche tecniche
| 최대 드라이브 속도 [1/min] | 500.0 |
|---|---|
| 연속 토크 [Nm] | 4.0 |
| 시작 토크 [Nm] | 6.0 |
| 회전 각도 [°] | > 360 |
| 유체 피드 스루 수 | 4.0 |
| 연결당 최대 압력 [bar] | 10.0 |
| 전기 피드 스루 수 | 6.0 |
| 최대 전압 [V] | 60.0 |
| 최대 전류 [A] | 1.0 |
| 중량 [kg] | 3.3 |
| 최소 주위 온도 [°C] | 5.0 |
| 최대 주위 온도 [°C] | 60.0 |
| 길이 X [mm] | 80.0 |
| 너비 Y [mm] | 80.0 |
| 높이 Z [mm] | 127.0 |
| 최대 정지 휨 모멘트 Mx [Nm] | 60.0 |
| 최대 정지 휨 모멘트 My [Nm] | 60.0 |
| 모멘트 Mx 최대 [Nm] | 50.0 |
| 모멘트 My 최대 [Nm] | 50.0 |
| 포스 Fz 최대 [N] | 2000.0 |
Dimensions and maximum loads
봉인의 수명
Dimensions and maximum loads
This is the max. total of all loads (acceleration forces and torques, process forces, emergency stops, etc.), which can affect a rotary feed-through, in order to ensure error-free function.
봉인의 수명
봉인 수명(6bar 압력 기준). 예: DDF-080 SE는 3변속 작동 시 150RPM으로 일정하게 구동됩니다(24시간). 봉인 수명: 1,500시간 후 봉인을 교체해야 합니다. (봉인 키트 SCHUNK에서 제공)
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Mounting
Bores and threads for stationary use
Media transmission
Pneumatic and electrical signals
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Rotary feed-through in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months