Illustration similar

LOG 99.0-M20x1.5-G1/8

Internal hole gripper

ID 398999

Internal hole gripper LOG, Size: 99, pneumatic, Mounting thread: M20x1.5, Air connection thread: G1/8"

Max. ambient temperature: 80 °C

Download CAD file

Mounting thread A	M20x1.5
Air connection thread B	G1/8"
Min. workpiece diameter [mm]	99.0
Max. workpiece diameter [mm]	110.7
Opening force for Ø Dmin [N]	2516.7
Opening force for Ø Dmax [N]	1166.7
Weight [kg]	0.44
Recommended workpiece weight [kg]	12.83
Cylinder volume per double stroke [cm³]	122.8
Max. operating pressure [bar]	6.0
Nominal operating pressure [bar]	6.0
Closing time [s]	0.44
Opening time [s]	0.44
Min. ambient temperature [°C]	-40.0
Max. ambient temperature [°C]	80.0
Housing material	PA 12
IP protection class	27
Diameter D [mm]	98.01
Tolerance Y	± 0,5
Height Z [mm]	116.33
Concentricity Ø V [mm]	0.6
Perpendicularity W [°]	± 1
Moment Mx max. [Nm]	2.5
Moment My max. [Nm]	2.5
Moment Mz max. [Nm]	0.0
Force Fx max. [N]	250.0
Force Fy max. [N]	250.0
Max. axial force Fz max. [N]	250.0

The gripping force can be set directly by the operating pressure. At a lower pressure than the nominal operating pressure, the full stroke cannot be achieved.
The size graduation varies by 1 mm respectively. Please note that the fastening thread A is independent of the size. (LOG 20-25: M14x1.5; LOG 26-63: M16x1; LOG 64-99: M20x1.5)
Information about other sizes can be found online.