MES BT-DC 40 Ø22x35
Face mill arbors
ID 1410341
MES BT-DC 40 Ø22x35, Toolholders
- Face mill arbors
- Series: Face mill arbors
- Dual Contact variant
- Toolholder interface: BT-DC 40
- Clamping diameter: 22 mm
- Thread in clamping diameter: M10
- Projecting length: 35 mm
- Run-out accuracy: ≤ 0.006 mm measured from taper to D1
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Détails techniques
| Technology | Face mill arbors |
|---|---|
| Series | Face mill arbors |
| Toolholder interface | BT-DC 40 |
| Clamping diameter D1 | 22 mm |
| Thread tightening bolt G | M10 |
| D2 [mm] | 48.0 |
| Projecting length L1 [mm]/[inch] | 35 mm / 1.4" |
| L4 [mm] | 8.0 |
| L11 [mm] | 19.0 |
| Weight [kg] | 1.0 |
| Dual Contact variant | yes |
| Coolant-proof | yes |
| Standard length | yes |
Variant
Voor het vasthouden van snijders met kruisgleuf
Uitloopnauwkeurigheid
≤ 0,006 mm gemeten van de kegel tot D1
Balanceergraad
G2.5 bij 25.000 tpm of Umax < 1 gmm
Gegevensdragers
Boorgat voor gegevensdrager optioneel
Wissel van gereedschapshouders
Voor automatische wissel van gereedschapshouders
Koelmiddeltoevoer
Koelvloeistofvoorziening volgens ISO 7388 JD/JF
De boorgaten voor JF-vormen zijn verzegeld voor transport
Gezichtscontact
Vergelijkbaar met DIN ISO 7388-2 JD/JF echter met vlakcontact
Dual Contact-versie met tegelijk conusvormige en vlakke werkoppervlakken
Levering
Inclusief spanbout
Individueel
Andere afmetingen en uitvoeringen op maat zijn op verzoek verkrijgbaar