SRH-plus 60-W-CB
ID 359333
Universal swivel head SRH-plus, Size: 60, pneumatic, pneumatic feed-through, Shock absorber version: soft, Center Bore (Version CB), Angle of rotation: 180 °, End position adjustability: 3 °, End position damping: hydr. damper
- No. of fluid feed-throughs: 8
- Torque: 69.9 Nm
Technical details
| Angle of rotation [°] | 180 |
|---|---|
| End position adjustability [°] | 3 |
| Torque [Nm] | 69.9 |
| IP protection class | 67 |
| Weight [kg] | 19.9 |
| Fluid consumption (2x nom. angle) [cm³] | 1120.0 |
| Swivel time without a payload [s] | 1.3 |
| Nominal operating pressure [bar] | 6.0 |
| Min. operating pressure [bar] | 3.0 |
| Max. operating pressure [bar] | 8.0 |
| Diameter of connecting hose | 6 x 3.9 x 1.05 |
| No. of fluid feed-throughs | 8.0 |
| Max. pressure fluid feed-through [bar] | 8.0 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 60.0 |
| Repeat accuracy [°] | 0.05 |
| Length X [mm] | 174.0 |
| Width Y [mm] | 263.9 |
| Height Z [mm] | 266.8 |
| Moment Mx max. [Nm] | 340.0 |
| Max. axial force Fz max. [N] | 9000.0 |
All units are also available in an FKM version. Please contact us for details.
Dimensions and maximum loads
Max. admissible inertia J
Dimensions and maximum loads
The indicated moments and forces are statical values and may appear simultaneously. Throttling has to be done for ensuring that the rotary movement takes place without impact or bouncing. Otherwise the service life reduces.
Max. admissible inertia J
- X-axis:
- Swiveling time
- Y-axis:
- Mass moment of inertia
- X-axis top:
- Cycles per hour
The diagrams are valid for applications with a symmetrical design (*) to the swivel axis: one-sided centrically arranged to one mounting face (**), and with an operating pressure of 6 bar. The mass moment of inertia always refers to the swiveling axis. The cycle times can be adjusted via throttling and adjustment of the shock absorber's stroke. Otherwise the lifetime may reduce.
On request, we are glad to assist you in designing other applications. Please contact us.
On request, we are glad to assist you in designing other applications. Please contact us.
产品系列的常规说明
重复精度
定义为 100 个连续回转循环后极限位置分布。
自订旋转角度
可要求提供可达到特殊回转角度和回转范围。
终端位置扭矩
注意采用单个传动活塞的力才能靠近重点位置前的最后角度（约 2°）。因此，双压力模块扭矩仅采用此区域可用的约额定扭矩的一半。可采用外部止挡在终端位置均匀达到最大扭矩。
回转时间
小齿轮/法兰围绕标称旋转角旋转的时间。不包括阀门开关时间、软管注入时间或 PLC 反应时间，但是计算周期时必须考虑这些时间。
标准条件
所示技术数据基于20°C 和大气压力环境。
外壳材料
铝合金，阳极氧化
启动
气动，带符合 ISO 8573-1:2010 [7:4:4] 的过滤压缩空气。
工作原理
双活塞齿条和小齿轮原理
标配范围
定心套、直连接口 O 型圈、装配和操作手册（带制造商声明）
保修期
24 个月
使用寿命特性
根据要求