SRH-plus 35-W-M8
ID 359271
- 유체 피드 스루 수: 4
- 출력 엔드의 E연결의 크기: M8
- 토크: 13.3 Nm
Technical details
| 회전 각도 [°] | 180 |
|---|---|
| 말단 위치 조정 능력 [°] | 3 |
| 토크 [Nm] | 13.3 |
| IP 보호등급 | 67 |
| 중량 [kg] | 4.3 |
| 유체 소비(2x 정격 각도) [cm³] | 216.0 |
| 탑재량 없는 스위블 시간 [s] | 0.9 |
| 정격 가동 압력 [bar] | 6.0 |
| 최소 작동 압력 [bar] | 3.0 |
| 최대 작동 압력 [bar] | 8.0 |
| 연결 호스의 지름 | 6 x 3.9 x 1.05 |
| 유체 피드 스루 수 | 4.0 |
| 유체 피드 스루 최대 압력 [bar] | 8.0 |
| 최소 주위 온도 [°C] | 5.0 |
| 최대 주위 온도 [°C] | 60.0 |
| 반복 정밀도 [°] | 0.05 |
| 출력 엔드의 E피팅 수 | 6.0 |
| 출력 엔드의 E연결의 크기 | M8 |
| 최대 전압 [V] | 24.0 |
| 와이어당 최대 전류 [A] | 1.0 |
| 최대 전류 [A] | 1.0 |
| 길이 X [mm] | 107.0 |
| 너비 Y [mm] | 156.0 |
| 높이 Z [mm] | 159.8 |
| 모멘트 Mx 최대 [Nm] | 30.8 |
| 최대 축 포스 Fz 최대 [N] | 1500.0 |
치수 및 최대 로드
최대 허용 관성 J
치수 및 최대 로드
표시된 모멘트와 포스는 통계적 값이며 동시에 나타날 수 있습니다. 회전 운동이 충격이나 튕김 없이 이루어지도록 하기 위해 스로틀링해야 합니다. 그러지 않으면 사용 수명이 단축됩니다.
최대 허용 관성 J
- X-axis:
- 선회 시간
- Y-axis:
- 관성의 질량 모멘트
- X-axis top:
- 시간당 사이클
요청 시 다른 애플리케이션 디자인도 기꺼이 지원해 드립니다. 문의해 주십시오.
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Customized angle of rotation
More swivel angles are available on request.
Torque in the end positions
Please note that the final angular degrees (approx. 2°) before the end position can only be approached using the force of a single drive piston. For this reason, double actuated modules only have about half the rated torque available in this area. An external stop can be used to provide the full torque even in the end positions.
Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.
Standard conditions
The technical data shown refers to an environment of 20 °C and atmospheric pressure.
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Double piston rack and pinion principle
Scope of delivery
Centering sleeves, O-rings for direct connection, assembly and operating manual with manufacturer’s declaration
Warranty
24 months
Service life characteristics
on request