iTENDO² SK 40 Ø20x110
Porta-ferramentas de sensores, componentes e acessórios
N.º de identificação 1484710
iTENDO² SK 40 Ø20x110
- 系列: iTENDO²
- 刀具夹持接口: SK 40
- 夹持直径: 20 mm
- 突出长度: 110 mm
- 回转精度: 2.5 x D 处 < 0.003 mm
- 平衡等级: 转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
- 最小扭矩: 330 Nm
- 不在供货范围内: 不包括驱动扳手
- 前提条件: iTENDO² 刀柄使用时需搭配 iTENDO² pad 或 iTENDO² easy connect。
Detalhes técnicos
| Technology | Sensory toolholder, components and accessories |
|---|---|
| Series | iTENDO² |
| Toolholder interface | SK 40 |
| Toolholder standard | DIN ISO 7388-1 AD |
| Clamping diameter D1 | 20 mm |
| D2 [mm] | 42.05 |
| D3 [mm] | 49.25 |
| D6 [mm] | 37.65 |
| Projecting length L1 [mm] | 110.0 |
| L2 [mm] | 51.0 |
| L3 [mm] | 8.0 |
| L4 [mm] | 33.5 |
| L5 [mm] | 91.0 |
| G | M8x1 |
| Min. torque [Nm] | 330.0 |
| Weight [kg] | 1.85 |
| Battery service life [h] | 10 |
| Acceleration sensor* | 100.0 |
| Max. rotational speed [1/min] | 30000.0 |
| External cooling/innternal cooling [bar] | 80.0 |
iTENDO² toolholder only in combination with an iTENDO² package (e.g. iTENDO² pad)
* g=9,81m/s2
* g=9,81m/s2
Run-out accuracy
< 0.003 mm at 2.5 x D
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Intermediate sleeves
Additional shank diameters can be clamped using intermediate sleeves
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply as per ISO 7388 AD
Length-setting screw
With adjustment screw for axial length adjustment
Individual
Additional sizes and customized designs are available upon request