MTTH HSK-A 63 MK4x160
Morse taper mountings with locking thread
N.º de identificação 23004343
MTTH HSK-A 63 MK4x160, Toolholders
- Morse taper mountings with locking thread
- Series: Morse taper mountings with locking thread
- Toolholder interface: HSK-A 63
- Thread in clamping diameter: M16
- Morse taper: MK 4
- Projecting length: 160 mm
- Run-out accuracy: ≤ 0.008 mm measured from taper to internal taper
- Balancing grade: G6.3 at 8,000 RPM or Umax < 1 gmm
Detalhes técnicos
| Technology | Morse taper mountings with locking thread |
|---|---|
| Series | Morse taper mountings with locking thread |
| Toolholder interface | HSK-A 63 |
| Toolholder standard | DIN ISO 12164-1 |
| MK size | MK 4 |
| Thread tightening bolt G | M16 |
| D2 [mm] | 48.0 |
| Projecting length L1 [mm]/[inch] | 160 mm / 6.3" |
| L4 [mm] | 134.0 |
| Weight [kg] | 2.06 |
| Coolant-proof | yes |
| Standard length | yes |
Versione
Per il montaggio di utensili cono morse con filettatura di bloccaggio, conformemente alla norma ISO 228A.
Concentricità
≤ 0,008 mm misurato dal cono al cono interno
Grado di bilanciatura
G6,3 a 8.000 giri/min o Umax < 1 gmm
Sedi chip
Fori sede chip conformi alla norma ISO 69873
Cambio del portautensile
Per il cambio automatico del portautensile
Ogni esigenza
Ulteriori misure e versioni personalizzate disponibili su richiesta