FTS 105-4800-175
ID 1598249
- Rozsah měření Fx, Fy: ± 2000 N
- Rozsah měření Fz: ± 4800 N
- Rozsah měření Mx, My: ± 175 Nm
- Rozsah měření Mz: ± 175 Nm
- Třída ochrany IP: 67
Technical details
| Vlastní hmotnost [kg] | 1.5 |
|---|---|
| Třída ochrany IP | 67 |
| Rozsah měření Fx, Fy [N] | ± 2000 |
| Rozsah měření Fz [N] | ± 4800 |
| Rozsah měření Mx, My [Nm] | ± 175 |
| Rozsah měření Mz [Nm] | ± 175 |
| Rozlišení Fx, Fy [N] | 0.1 |
| Rozlišení Fz [N] | 0.192 |
| Rozlišení Mx, My [Nm] | 0.007 |
| Rozlišení Mz [Nm] | 0.00525 |
| Relativní odchylka zobrazení ve vztahu k rozsahu měření | <1,0 %-fs |
| max. odchylka zobrazení Fx, Fy [N] | 20.0 |
| max. odchylka zobrazení Fz [N] | 48.0 |
| max. odchylka zobrazení Mx, My, Mz [Nm] | 1.75 |
| max. vzorkovací frekvence [Hz] | 1000.0 |
| Maximální výstupní rychlost (UDP) [Hz] | 2000.0 |
| Informace o příslušenství | Kromě snímače FTS je zapotřebí propojovací kabel a skříňka rozhraní. |
Rozměry a maximální zatížení
Rozměry a maximální zatížení
Alle Kräfte und Momente, die auf den Sensor wirken, müssen innerhalb des spezifizierten Messbereichs liegen.
Das Überschreiten des Messbereichs reduziert die maximale Anzahl an Lastzyklen und kann zur Beschädigung des Sensors führen. Bitte sprechen Sie uns an, falls Ihre Anwendung den Messbereich überschreitet.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Measuring accuracy
< 1% of the upper limit value of the measuring range at 22 °C
Splash water protection
IP67 as standard
Housing
Aluminum and stainless steel
Warranty
24 months