The desired stroke of the linear module can be entered at this point.

If the linear module has been designed using the linear module sizing assistant, the stroke is automatically adopted and may not be changed, as this affects the technical characteristics of the linear module.

The unit can be secured either by using T-nuts or mounting strips.

The required number of mounting rails is determined automatically based on the total length of the linear module.

The holding brake holds the slide in a particular position even without energy supply.
The holding brake is pneumatically actuated.
The brake function is activated in unventilated state.

The absolute path measuring systems are optionally available with the interfaces: HIPERFACE® or DRIVE-CLiQ.

The encoder systems are certified according to SIL2/PLd.
This means that even demanding applications with high requirements in the area of machine safety can be implemented.

The outlet of the motor connector can be selected depending on the desired application.





The selected side is also adopted in the CAD model.

Suitable drag chains are available as accessories.
These are adapted to the respective effective stroke, supplied incl. mounting material, and if necessary, pre-assembled.